Need help?Do you have a question about the MINOURA MAG-850LW Series and is the answer not in the manual?
General| Resistance Type | Magnetic |
|---|---|
| Drive System | Belt |
| Display | LCD |
| Functions Displayed | Time, speed, distance, calories, pulse |
| Transport Wheels | Yes |
| Model | MAG-850LW |
Open frame legs, fit rubber feet correctly to ensure full floor contact for stability.
Open couplings, insert bike skewer, and adjust coupling rotation for a secure fit.
Turn right side hub handle clockwise to contact skewer nut and firmly secure the bike.
Apply Mag unit, then adjust wheel position using left knob and right hub handle for alignment.
Ensure skewer ends are inserted and tighten hub handle for firm bicycle hold.
Set 2mm gap between tire and roller using micro-adjust screw and foot pedal pressure.
Remove Mag unit, attach Z-adapter, and reinstall Mag unit for smaller wheel sizes.
Use the supplied skewer and grommet to avoid fitting problems and protect the skewer.
Loosen knob, place holder on handlebar, close, pull up bolt, and tighten securely.
Move the white lever on the Mag unit or remote device towards the (H) symbol.
Move the white lever on the Mag unit or remote device towards the (L) symbol.
Adjust wire tension by setting lever to 'H', removing cap, and adjusting screw/nut.
Provides contact details for Minoura Japan Head Office and North America.
To Next Page
