MINOURA MAG-500 Series - User Manual

- 1 -
Resolution Diagram
MAG-500 series instructions manualMAG-500 series instructions manual
MAG-500 series instructions manualMAG-500 series instructions manual
MAG-500 series instructions manual
F-1 : Coupling (Right) LM-1 : Flywheel Cover (white)
F-4 : Coupling Cover (move side) LM-2 : Flywheel Side Inner Case
F-7 : Hub Handle (3/8” thread) LM-3 : Mag Side Inner Case
F-9 : Skewer Nut Protector (Grommet) LM-4 : Dial Outer Cover
HF-4 : Rubber Frame Cap (35mm) LM-5 : Remote Outer Cover
M5-1: MAG-500 Main Frame LM-6 : Flywheel (500g)
M5-2: Rubber Foot Cap (28.6mm) LM-7 : Alloy Rotor
M5-3: Pressure Plate LM-8 : Axle w/ Bearings
MF-3 : Mirco Adjust Knob Set LM-9 : Connection Plate
LM-10 : Base Plate
F-1
F-4
F-7
M5-2
HF-4
M5-1
MF-3
LM-1
LM-6
LM-2
LM-9
LM-8
LM-10
LM-3
LM-7
LM-4 / LM-5
F-9
M5-3

Summary

MAG-500 Series Resolution Diagram

Important Notes and Warnings

How To Setup Your MAG-500 Trainer

Step 1: Open Frame Support Legs

Position the trainer frame, ensuring rubber feet contact the floor correctly.

Step 2: Open Couplings

Turn right side hub handle anti-clockwise to open couplings.

Step 3: Insert Skewer

Insert left skewer side into left coupling and adjust rotation.

Step 4: Connect Bike to Coupling

Hold bike, turn hub handle clockwise to contact skewer nut.

Step 5: Apply Mag Unit to Tire

Position Mag unit, adjust position if tire contacts housing.

Step 6: Contact Roller with Tire

Turn micro adjust knob for 3mm tire compression by roller.

Using The Mag Unit

Increasing Load Force

Instructions for increasing resistance levels on the Magturbo unit.

Decreasing Load Force

Instructions for decreasing resistance levels on the Magturbo unit.

How To Install the Remote Lever

Trouble Shooting Your Remote Shifter Unit

MINOURA MAG-500 Series Specifications