MINOURA V150-2 - V1.2 3-2010 User Manual

Indoor Bicycle Trainer – instructions manual
Minoura Japan Headquarters Minoura North American Tech Center
(for all customers) (for U.S. residents only)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan 1996 East Avenue, Hayward, CA 94541 U.S.A.
Phone: +81-584-27-3131 / Fax: +81-584-27-7505 Phone: 1-510-538-8599 / Fax: 1-510-538-5899
Email: minoura@minoura.jp Email: support@minourausa.com
www.minoura.jp
Made in Japan
V150
-2
Read this instructions carefully before use
Applicable Tire Size Capacity
• Wtihout Z-Adaptor: 26x1.5 - 700x40c
• With Z-Adaptor: 22x1-3/8 - 26x1.25
(ver.1.2 2010/3)

MINOURA V150-2 - V1.2 3-2010 Specifications

General

Brand	MINOURA
Model	V150-2 - V1.2 3-2010
Category	Fitness Equipment
Language	English

Summary

Important Notice

V150-2 Schematics

How To Setup Your V150 Trainer

Initial Installation Steps

Steps for replacing the rear wheel skewer and installing the Mag unit and foot pedal.

Positioning and Wheel Mounting

Instructions for placing the trainer on a level floor and mounting the rear wheel securely.

Roller and Tire Contact Adjustment

Guidance on adjusting the drive roller pressure to the rear tire for optimal performance and wear.

How To Adjust Resistance Level

Remote Shifter Installation

Instructions for attaching and securing the remote shifter band to the handlebar or stem.

Resistance Level Control

How to use the remote shifter lever to increase or decrease resistance.

Troubleshooting and Adaptor Use

Remote Shifter Adjustment

Steps to fix shifting problems by adjusting the remote shifter cable tension.

Small Wheel Adaptor Installation

Guide for installing the Z-shaped adaptor to raise roller height for smaller tires.