For More Information
Warranty Period
Minoura offers 1-year limited warranty to the original user from
the date of your purchase.
This program covers any defects caused by the manufacturer's
mistakes during production. It will not cover any results caused
by the user's misuse, natural wear or unauthorized modifications.
For more information, visit www.minoura.jp.
VERGO-TF
Wheel Holder
– instructions manual
About The Wheel Holder
Example Style:
Installing on the rail end of
VERGO-TF2 with two bikes
Parts Name
MINOURA Japan Headquarters
(for ALL customers)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Fax: +81-584-27-7505
Email: minoura@minoura.jp
Web: www.minoura.jp
MINOURA North America
(for U.S. residents only)
Hayward, California, U.S.A.
Phone: 1-510-538-8599
Fax: 1-510-538-5899
Email: support@minourausa.com
Made in Japan
(ver.1.4 2017/8)
• Front wheel needs to be removed to mount bike to VERGO-TF. This Wheel Holder safely holds the
removed wheel without worry of damaging your wheel or car.
• Can hold up to two wheels on the single arm. For standard 9mm quick release type wheel only. Any other
system such as Thru Axle type hub cannot be used.
Arm
Wheel Installation Position #2
Wheel Installation Position #1
Angle Adjust
Knob Nut
Knob Bolt
Bracket
Plate Nut
Please note, the hole
diameters are different
between the right and
left sides.
!
To Next Page
Need help?
General
