Charging the battery
To charge the built-in battery, open the cover for
charging connection (7), which is located on the
bottom of the unit, and connect the DC jack (5)
of the scope to an USB port of a switched-on
computer using the cable provided.
Charging begins when the green LED (6) lights
up. This green LED is located underneath the
clip directly next to charging connection.
When the charging is completed, the green
LED turns off.
After charging, remove the socket from the DC
jack and close the cover.
The MINOX NVD mini is available in two
different packaging units. Due to lack of
space, the “Air Line“ unit is not available with
an AC adapter. This is due to the fact that
different adapters are used in the various
regions of the world. However charging the
MINOX NVD mini is always possible using the
USB cable and a respective PC or laptop.
We would gladly send the appropriate AC
adapter for your region free of charge.
Please contact us under service@minox.com
or +49 6441 917-0.
The packaging units determined for retailers
are supplied with the appropriate AC adapter
16
Mnx_Man_NVDmini_RZ_neu.indd 16 08.02.11 11:28
To Next Page
Loading...
General