EasyManua.ls Logo

miogo MTB1 - Getting Started with Your Blender; Before First Use Instructions

miogo MTB1
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
EN
1 Smoothie button 5 Minimum speed position
2 Cleaning button 6 Maximum speed position
3 Crushed ice button 7 P "Pulse" function position
4
(on) position and program
selection
8 OFF position
Before first use
Check that the appliance has not been damaged during transport. Do not plug in
a damaged appliance under any circumstances! Please contact your retailer if the
appliance is damaged.
Remove all protective lm, labels and other packaging from inside and outside the
appliance.
Place all the elements on a at surface. Then clean the blender jar, lid and measuring
cap with soapy water. Rinse with clear water and dry.
Refer to the "Cleaning and Maintenance" section for the recommended precautions
regarding cleaning.
The jar and removable accessories can be placed in the dishwasher.
Warning:
Never immerse the motor in water, as this could cause electrocution.
The jar contains very sharp blades. Handle them with care!
Respect the level marks indicated on the jar. Failure to do so may result in
damage to the appliance and/or injury to yourself.
Do not place hot or boiling food in the appliance. Use cold or warm food.