19
MOTOR UNIT
• Wipe the motor unit with a sponge, and then thoroughly dry it with a soft cloth.
• Stubborn stains can be removed with a damp sponge and, if necessary, a little non-
abrasive cleaning product (e.g. washing-up liquid).
• Do not immerse the motor unit in water or any other liquid.
STORAGE
• Make sure the appliance is completely dry before storing it.
• Store the appliance in a cool, dry place.
• Be careful not to completely close the lid to allow air to circulate and to prevent odours
from forming.
• You can store the cable by slipping it inside the motor unit ( ).
Troubleshooting
If the information in this table does not help you solve your specic problem, do not
carry out repairs yourself, but take your appliance to your retailer’s after-sales service.
Repairs carried out by unauthorised personnel are not covered by the warranty.
Problem Possible causes and solutions
The appliance is not working. • Make sure the appliance is
assembled correctly.
• Make sure that the power plug is
properly connected.
• Check to see if there is a power
failure or if the socket used is
working.
The motor is running but the parts are
not turning.
• Make sure that the motor unit is
correctly installed on a at, stable
surface.
The device is leaking. • Make sure that the blade assembly
is installed correctly and screwed in
sufciently.
EN
To Next Page
Loading...