To Next PageTo Next Page
Need help?Do you have a question about the Mipro ACT-707 MB and is the answer not in the manual?
Overview of the receiver module's LCD screen, displaying operational information and ACT feature capabilities.
Sets receiver GROUP and CHANNEL parameters using UP/DOWN and MENU buttons.
Shows the currently used frequency; cannot be used for frequency alternation.
Indicates or allows setup of the squelch level for noise reduction.
Indicates volume level, allowing switching between 'ON' and 'Mute' status.
Allows setup of channel user name, max 6 characters, from letters, numbers, and symbols.
Sets receiver address for remote control; up to 64 modules can be controlled via PC.
Explanation of error codes displayed on the LCD, including causes and solutions.
Indicates the use of pre-programmed frequency in the receiver.
Shows personalized frequency usage, programmable via ACT Software for specific models.
Connects lavaliere or headset microphones to the transmitter.
Turns the belt pack transmitter on or off for operation.
Wiring diagram for connecting a 2-wire electret condenser microphone capsule.
Wiring diagram for connecting a 3-wire electret condenser microphone capsule.
Wiring diagram for connecting a dynamic microphone.
Wiring diagram for connecting an electric guitar.
Wiring diagram for line-in connection with specified impedance and attenuation.
Explanation of error codes displayed on the LCD, including causes and solutions.
Indicates the use of pre-programmed frequency in the receiver.
Shows personalized frequency usage, programmable via ACT Software for specific models.
General| Brand | Mipro |
|---|---|
| Model | ACT-707 MB |
| Category | Automobile Accessories |
| Language | English |
