PAIRING BLUETOOTH MUSIC RECEIVER
! Make sure the built-in Bluetooth music receiver is powered on and bring the
wireless device within reception range.
! To power on the Bluetooth music receiver and ready for pairing, press & hold
the power button for 3-5 seconds until blue/red indicator light is flashing
intermittently.
! The blue/red flashing will flash intermittently to indicate the unit is powered and
is now ready to be paired to your Bluetooth smart wireless device. However, if
blue/red is not flashing intermittently this indicates the unit is not powered and
is not ready to be paired.
! Navigate to the Bluetooth Manager on the wireless device. Locate and enable
the Bluetooth feature.
! Search Bluetooth devices for the music receiver's ID. The device ID is the word
‘MIPRO MB-XX’ and followed by two numbers for the two XXs. Click on the
device ID.
! Enter "0000" when you're prompted to enter a PIN number. This will cause your
wireless device to pair with the music receiver.
! Once paired and connection is made, the blue color indicator light on the music
player will continue to flash intermittently.
! Reconnect to music receiver after moving your wireless device out of its range,
lost signal, objects are blocking the Bluetooth signal or after turning off the
Bluetooth feature on your wireless device. Navigate to the Bluetooth Manager,
and click on the correct device ID. You won't be prompted to enter the PIN
number, 0000, again.
! Pair another wireless device. Navigate to the Bluetooth Manager on the
currently-connected device and disable the Bluetooth function. Follow the Pairing
on the new Bluetooth device to connect the new device.
! To power off the Bluetooth music receiver, press & hold the power button for
3-5 seconds until blue/red indicator light is turned off and no longer flashing
intermittently.
situations requiring immediate attention.
CH2 Channel Screen
CH2 RF indicator: Glows green indicates a RF link from transmitter to receiver.
CH2 Sync port: Uploads infrared signal to transmitter.
SCAN/ACT CH2: Scans for an interference-free frequency & Synchronizes the
receiver and transmitter frequencies.
CH2 VOL: Powers receiver on/off and wireless CH2 volume.
CH1 Channel Screen
CH1 RF indicator: Glows green indicates a RF link from transmitter to receiver.
CH1 Sync port: Uploads infrared signal to transmitter.
SCAN/ACT CH1: Scans for an interference-free frequency & Synchronizes the
receiver and transmitter frequencies.
CH1 VOL: Powers receiver on/off and wireless CH1 volume.
Bluetooth Power Button & Indictor: The built-in Bluetooth music receiver
lets you connect a Bluetooth-enabled wireless device such as an iPod, iPhone,
iPad or other smart phones, tablets, media players and play music wirelessly
through this portable PA system.
Alarm Siren Button: Provide warning of approaching or presence of threats or
B10
B15
B11
B16
B12
B17
B13
B18
B14
B19
B20
B21
06
07
PORTABLE WIRELESS PA SYSTEM PORTABLE WIRELESS PA SYSTEM
To Next Page
Loading...