Mira Activate Series User Manual

Mira Activate
Digital Shower
Installation and User Guide
Please leave these instructions with the user
1399980

Mira Activate Series Specifications

General

Brand	Mira
Model	Activate Series
Category	Bathroom Fixtures
Language	English

Summary

Important Safety Information

Specifications

Suitable Plumbing Installations

Installation Schematic

General Installation

Installation: Digital Mixing Valve

Installation: Ceiling Fed Shower Fittings

Installation: Rear Fed Shower Fittings

Installation: Deluge Overhead

Installation: User Controller

Commissioning & Starting the Shower

Commissioning (Applies to Pumped Valve only)

User Controller: Features

Set Up: Mobile App

Fault Diagnosis

Diagnosis stage 1 (Error code check)

Checks for error codes displayed on the controller or via the Mira Showers app.

Diagnosis stage 2 (Valve status check)

Diagnosis stage 3 (No Power to the product)

Steps to diagnose and resolve issues related to the product not receiving power.

Diagnosis stage 4 (Product powered, but no error code)

Troubleshooting steps for when the product is powered but no error code is displayed.

No Flow / Low Flow

Showering temperature is hotter / colder than indicated or is fluctuating

Troubleshoots temperature variations, including the effect of shower fittings and inlet conditions.

Shower turning off too soon

Cleaning and Maintenance

Replace/Clean the Check Valves/Filters