Need help?Do you have a question about the Mira event and is the answer not in the manual?
General| Brand | Mira |
|---|---|
| Model | event |
| Category | Bathroom Fixtures |
| Language | English |
Provides an overview of the Mira Event power shower, its features, and limitations.
Details critical safety precautions and regulatory compliance for installation and use.
Highlights key warnings regarding electrical safety, operation, and potential hazards.
Lists all items included in the Mira Event shower package for user verification.
Outlines general, plumbing, and electrical specifications of the Mira Event shower.
Details the standards and approvals the appliance complies with.
Covers essential general, electrical, and plumbing installation requirements for safe setup.
Warns about the lack of thermostatic control and importance of temperature setting.
Illustrates correct and incorrect plumbing layouts for optimal installation.
Details how to select and configure inlet supply options for installation.
Explains options for electrical supply cable entry into the appliance.
Provides a detailed guide for changing the inlet supply port configurations.
Guidance on selecting the location for the appliance.
Instructions on drilling, plugging, and fixing the appliance to the wall.
Instructions for making electrical supply and inlet water connections.
Steps for preparing pipework and securely fixing the appliance.
Procedure for refitting the appliance cover and controls.
Procedure to prime the pump assembly before electrical supply connection.
Guide to adjust and set the maximum safe showering temperature.
Instructions on operating the flow and temperature control knobs for desired shower experience.
Common malfunctions and their remedies for user-level fault finding.
Advanced troubleshooting steps for installers to diagnose issues.
Recommendations for cleaning the shower appliance and fittings.
Procedure for cleaning or renewing inlet filters and their seals.
Steps for maintaining or replacing inlet manifold check valves and 'O' seals.
Guidance on renewing push-fit collets or internal manifold 'O' seals.
Procedure for replacing the mixer assembly.
Steps for cleaning or replacing the pump assembly.
Instructions for inspecting or replacing the flow control seal.
Detailed guide for replacing the printed circuit board (PCB).
Procedure for maintaining or renewing the on/off micro-switch.
Steps for replacing the smaller micro-switch.
Electrical wiring diagram for the Mira Event shower.
Provides physical dimensions of the Mira Event shower unit.
Lists part numbers and descriptions for available spare parts.
Information on available optional accessories for the shower.
Details the product guarantee, warranty validation, and coverage.
Information on purchasing spare parts and arranging for service.
Contact details for customer services, including phone, email, and postal addresses.
To Next Page
