Mira Element Thermostatic Mixer User Manual

1
MIRA ELEMENT
Installation and User Guide
THERMOSTATIC MIXER
These instructions must be left with the user.

Mira Element Thermostatic Mixer Specifications

General

Brand	Mira
Model	Element
Finish	Chrome
Temperature Control	Thermostatic
Minimum Running Pressure	0.1 Bar
Maximum Static Pressure	10 Bar
Temperature Stability	±2°C
Mounting	Wall Mounted
Inlet Connections	15mm
Outlet Connection	1/2 inch
Max Flow Rate	15 l/min
Type	Thermostatic Mixer

Summary

SAFETY: WARNINGS

SPECIFICATIONS

Operating Parameters

Details pressures, temperatures, and connections for the mixer.

Connections

Flow Rates

INSTALLATION REQUIREMENTS

INSTALLATION

General

Provides general installation guidelines and compliance requirements.

Installation Methods

Exposed Element Thermostatic Mixer

Overview of installation methods for the exposed mixer.

Built-in Thermostatic Mixer

Overview of installation methods for the built-in mixer.

Exposed Thermostatic Mixer

Rear Entry Supplies (rising or falling concealed pipework)

Rising or Falling Supplies

Built-in Thermostatic Mixer

Solid Wall or Stud Partition (Using Securing Brackets - Mounting off Front Face of Wall)

Solid Wall or Stud Partition (Using Rear Fixing Points on the Thermostatic Mixer)

Laminated Panel (Using Securing Brackets - Mounting on Rear Face of Wall)

Control Assembly (Built-in Models)

REVERSED INLET SUPPLIES

COMMISSIONING

Maximum Temperature Setting

Procedure to check and adjust the maximum water temperature.

OPERATION

FAULT DIAGNOSIS

MAINTENANCE

Flow Diagram, In-service Test Procedure

Inlet Filters

Exposed Models

Built-in Models

TYPE 2 VALVES

Application

Supply Conditions