Mira SILVER User Manual

1
MIRA SILVER
Installation and User Guide
THERMOSTATIC MIXER
These instructions must be left with the user.
For SPARES, ADVICE
or REPAIRS
Please call us on
0844 571 5000
(UK Only)

Mira SILVER Specifications

General

Type	Analog
USB Connectivity	No
Power Supply	External AC adapter
Phantom Power	+48V (switchable)
Headphone Output	Yes

Summary

SAFETY: WARNINGS

Important Cautions

SPECIFICATIONS

Operating Parameters

Details pressures, temperatures, and shut-off times for optimal performance.

Connections Specification

Specifies inlet and outlet connection types and sizes for both models.

Flow Regulator Installation and Rates

INSTALLATION REQUIREMENTS

System Compatibility

INSTALLATION

General Installation Guidelines

General advice, compliance, and pipework requirements for installation.

Installation Methods Overview

Exposed Mixer Installation Methods

Built-in Mixer Installation Methods

Exposed Mixer Installation Steps

Rear Entry Supplies Installation

Step-by-step guide for installing with rear entry pipework.

Rising or Falling Supplies Installation

Step-by-step guide for installing with rising or falling supplies.

Built-in Mixer Installation Steps

Solid Wall/Stud Partition (Front Face Brackets)

Guide for mounting on solid/stud walls using front face brackets.

Solid Wall/Stud Partition (Rear Fixing Points)

Guide for mounting on solid/stud walls using rear fixing points.

Laminated Panel Installation

Guide for mounting on laminated panels using rear face brackets.

Control Assembly for Built-in Models

Reversed Inlet Supplies Procedure

OPERATION

COMMISSIONING

Maximum Temperature Setting

Procedure for setting and adjusting the maximum safe temperature.

FAULT DIAGNOSIS

MAINTENANCE

General Maintenance and Care

Inlet Filter Maintenance

Exposed Models Filter Care

Built-in Models Filter Care

CUSTOMER SERVICE

Guarantee Information

Support and Contact Details