Need help?Do you have a question about the Mira Mode 1.1980.001 and is the answer not in the manual?
General| Model Number | 1.1980.001 |
|---|---|
| Brand | Mira |
| Finish | Chrome |
| Valve Type | Thermostatic |
| Warranty | 5 Years |
| Product Type | Digital Shower |
| Maximum Flow Rate | 12 l/min |
| Installation Type | Wall Mounted |
| Inlet Connections | 15mm |
| Outlet Connection | 1/2 inch |
| Type | Shower Controller |
Lists components included for high pressure/combi installations.
Lists components included for pumped/gravity installations.
Diagram showing setup for a dual ceiling fed shower.
Diagram showing setup for a rear fed shower.
Diagram showing setup for a dual bath/shower system.
Key points and cautions to observe during the installation process.
Steps to follow for initial setup and verification of the high pressure shower system.
Steps to follow for initial setup and verification of the pumped shower system.
Explains how to use the overhead, handset, and bath fill functions via the interface.
Identifies symptoms and error codes, providing initial troubleshooting steps.
Checks the power indicator status for product functionality and errors.
Steps to diagnose and resolve issues related to the product not receiving power.
Further troubleshooting for powered products without specific error codes, covering flow, temperature, and other issues.
Guidance on cleaning showerheads and inspecting the hose for optimal performance.
Specific instructions for cleaning the spray plate on Mira Maxim models.
Information on product guarantee, coverage, and how to register it.
Guidance on resolving issues and contact information for customer support.
To Next Page
