Need help?Do you have a question about the Mira escape and is the answer not in the manual?
General| Product Type | Electric Shower |
|---|---|
| Minimum Running Pressure | 0.7 bar |
| Maximum Static Pressure | 10 bar |
| Energy Rating | A |
| Material | Plastic |
| Warranty | 2 Years |
| Inlet Connection | 15mm |
| Outlet Connection | 1/2 inch |
| Color | White |
Details the power, voltage, and included fittings for the Mira Escape 9.8 kW model.
Legal information regarding patents and design registrations for the product.
Critical safety warnings and cautions regarding installation, operation, and user safety.
Specific safety instructions related to earthing, mains connections, and preventing freezing.
Requirements for electrical installation according to BS 7671 and local regulations.
Requirements for plumbing installation according to UK Water Regulations and Building Regulations.
Considerations for users with difficulties and sensitivity to hot water.
Identifies faults like leaks, damage, odd noises, or performance changes requiring action.
Lists the physical parts included in the Mira Escape shower packaging.
Details the documents provided with the shower, such as brochures and templates.
Minimum and maximum water pressure requirements for optimal shower performance.
Details on fuse rating, cable size, and compliance with electrical standards.
Information on product compliance with relevant directives for CE marking.
Guidelines for installing the shower unit, including water hardness and valve recommendations.
Advice on avoiding hose kinks and the function of the hose retaining ring.
Procedures for flushing pipework and making secure plumbing connections.
Crucial instructions for safe electrical connection, earthing, bonding, and RCD usage.
An overview of the installation process for the Mira Escape shower.
Essential safety warning to turn off electrical and water supplies before installation.
Steps for preparing the shower unit, including removing the cover and service tunnel.
Guidance on determining water supply direction and connecting the cold water pipe.
Instructions for marking, drilling, and securing the shower unit to the wall.
Procedures for flushing supply pipes and fitting case inserts before final connection.
Instructions for feeding the electrical cable, fitting the earth sleeve, and connecting terminals.
Instructions for correctly refitting the service tunnel and cover after wiring.
Initial checks and actions before powering up, including water supply and control settings.
Steps for powering on, checking for leaks, and setting initial temperature.
Detailed steps for adjusting temperature across different heater settings.
Procedures for stopping the shower, isolating power, and purging residual water.
Explanation of the heating mechanism and how cold water flow affects temperature.
Details on the three heater settings and their relationship with flow rate and temperature.
How to adjust shower settings based on seasonal variations in water supply temperature.
How other water usage impacts shower temperature stability.
Step-by-step guide to switching on, setting temperature, and checking water temperature.
Instructions for stopping the shower, isolating power, and notes on residual water drainage.
Troubleshooting steps for when the shower does not turn on, including power and supply checks.
Diagnosing and resolving issues where the shower temperature fluctuates unexpectedly.
Addressing problems with the handset dripping when the shower is off, related to pressure.
Troubleshooting common causes of reduced or absent water flow.
Diagnosing issues where temperature controls have minimal impact on water temperature.
Resolving problems where heater settings do not alter the water temperature.
Troubleshooting steps for when the shower water does not stop after pressing the stop button.
Diagnosing why hot water is not produced on higher heater settings.
Instructions for cleaning the shower handset and spray plate for optimal performance.
Steps for safely accessing and maintaining the inlet filter.
Detailed procedure for removing, cleaning, or replacing the inlet filter.
Instructions for refitting the service tunnel and cover after performing maintenance.
A comprehensive list of available spare parts for the Mira Escape model.
Information on the optional DCV-H accessory and its purpose.
Details on the product guarantee, validation, and coverage.
Information on purchasing spare parts and their availability period.
Advice on initial troubleshooting and contact details for customer support.
Telephone numbers and postal addresses for customer service and support.
To Next Page
