Need help?Do you have a question about the Mira JUMP and is the answer not in the manual?
General| Type | Electric Shower |
|---|---|
| Temperature Control | Thermostatic |
| Material | Plastic |
| Installation | Wall Mounted |
| Energy Efficiency | A Rated |
| Finish | White |
| Water Pressure | 0.7 - 5.0 bar |
Crucial safety instructions for installation, operation, and user awareness, including warnings and cautions.
Detailed safety requirements for earthing, supplementary bonding, and circuit protection (RCD).
Safety guidelines regarding user supervision, children, skin conditions, and appliance disposal.
Details water supply pressure, cistern feed, pipework routing, and fitting considerations.
Covers supply rating, earthing, bonding, RCD, and switch requirements for safe installation.
Details on flushing pipes, connecting water supply, and fixing the shower securely to the wall.
Procedures for stripping cables, making connections to terminal blocks, and ensuring proper earthing.
Guide to setting controls, checking water flow, and testing heater settings (LOW, ECO, HIGH).
Step-by-step guide on turning the shower on, selecting heater settings, and adjusting temperature.
Table of common problems, their probable causes, and possible remedies for user/tradesperson.
Lists issues requiring a competent tradesperson, such as microswitch failure or heater element issues.
Continues troubleshooting table for issues like flow regulator faults, scaled heater tanks, and blocked inlet filters.
To Next Page
