Mira JUMP - Plumbing Specifications; Minimum and Maximum Pressure Requirements; Electrical Specifications; Fuse Requirements

10
Plumbing
1. Minimum maintained inlet pressure for satisfactory operation:
8.5kW and 9.5kW: 70kPa (0.7 bar).
10.8kW: 100kPa (1.0 bar).
2. Maximum static inlet pressure: 1000kPa (10 bar).
3. Minimum static pressure to keep the ow valve closed: 50kPa (0.5 bar).
Electrical
1. The 8.5kW and 9.5kW appliance requires a 40Amp fuse.
The 10.8kW requires a 45 Amp fuse.
2. The terminal blocks will accept cable up to 16mm
2
.
Standards and Approvals
1. This Mira Jump shower complies with all of the relevant directives for
CE marking.
Flow Rate Graph
1. These curves are for the specied outputs at 240V.
2. All appliance heating elements have a manufacturing tolerance. Flow rates may
be above or below those shown on the ow rate graph.
3. The left-hand axis shows temperature rise.
Temperature rise = (Showering temperature) - (Supply water temperature)
Flow Rate (l/min)
Temperature Rise (°C)
8.5kW
9.5kW
10.8kW