Need help?Do you have a question about the Mira Advance ATL J97C and is the answer not in the manual?
General| Product Type | Electric Shower |
|---|---|
| Temperature Control | Thermostatic |
| Installation Type | Wall Mounted |
| Inlet Connection | 15mm compression |
| Warranty | 2 years |
| Safety Features | Phased shutdown |
| Outlet Connection | 1/2 inch BSP |
| Minimum Running Pressure | 0.7 bar |
| Maximum Running Pressure | 10 bar |
| Water Entry Points | Bottom |
| Cable Entry Points | Bottom |
| Approvals | BEAB |
| Finish | White |
Details the different Mira Advance ATL models (Standard, Flex, Memory, Extra) and their features like temperature limit and pump compatibility.
Highlights critical warnings about scalding, electrical safety, proper installation environment, and appliance handling to prevent injury or damage.
Lists essential cautions for installers and users, covering installation compliance, usage limitations, and advice on maintaining the appliance.
Illustrates and lists all items included in the product packaging, from the shower unit itself to fixings and essential documentation.
Details plumbing and electrical specifications, along with compliance information for standards like BEAB Care Mark and CE marking.
Provides precise dimensions of the Mira Advance ATL shower units, crucial for planning installation space and clearances.
Offers advice on acclimatising the unit, ensuring stable water supply, and routing cables/pipes correctly for optimal function and safety.
Specifies plumbing rules including connection to cold mains, avoiding sealants, pre-soldering fittings, and proper pipework.
Covers pipework routing, flushing, fitting surfaces, isolating valves, water treatment recommendations, and essential clearances for backflow prevention.
Details crucial electrical requirements, including supply adequacy, earthing, supplementary bonding, circuit protection (RCD, fuses), and connection procedures.
Guides users through the first steps of installation, including power isolation, cover removal, cable routing, and flushing the pipework before connecting the shower.
Explains how to drill fixing holes, mount the shower, connect the water supply, and perform the critical priming process for correct operation.
Covers final assembly steps like reconnecting cables, refitting covers, securing the unit, and installing shower fittings as per instructions.
Details which Mira Advance ATL models are compatible with the Instantmatch by Whale® Digital Pump and their connection methods (hardwire/wireless).
Provides a visual representation of the electrical connections for the drain pump system, linking the shower, power supply, and pump.
Explains how to identify different Instantmatch pump types and configure jumper settings on the driver and signal boards for proper shower integration.
Offers advice on positioning the wireless pump transformer for best signal strength and mitigating potential interference from other radio devices.
Details the step-by-step process to wirelessly register the drain pump with the shower and confirm a successful connection.
Addresses common issues encountered during drain pump registration or testing, providing solutions for non-communication or incorrect operation.
Outlines essential checks after installation, including supply, water flow, priming, and safe shutdown procedures prior to commissioning the shower.
Guides on setting the maximum showering temperature and initiating the appliance's learning cycle to adapt to site conditions.
Details the final steps of commissioning, including testing operation and provides solutions for common errors encountered during the process.
Explains the 'BEAB Care' compliant mode identified by specific beeps and light pulses, and how to recommission the shower in this mode.
Describes how to store and recall preferred showering temperatures using the memory function, and its interaction with maximum temperature settings.
Provides troubleshooting guidance for installers, emphasizing safety precautions when accessing internal components and checking electrical/water connections.
Details the diagnostic procedure to identify and rectify faults, including interpreting error codes and observing unit indicators.
Lists error codes A, 0 through 4, their visual indicators, and suggested causes and corrective actions for common shower malfunctions.
Covers error codes 5 through 11, detailing their indicator displays and providing potential causes and rectification steps for various operational issues.
Details error codes 12 through 17, including indicator displays and troubleshooting guidance for problems like unsafe hot water or unit startup failures.
Addresses error code 18 related to pump communication and explains the 'Shower Stop' timer feature for preventing unattended use.
Outlines the procedure for BEAB Care in-service tests, their required frequency, and lists the necessary equipment for performance checks.
Provides comprehensive, step-by-step instructions for conducting BEAB Care tests, including measuring temperature, voltage, and flow rates accurately.
Details the process for tradespersons to clean or replace the shower's inlet filter, including safety steps and re-priming the unit.
Lists available spare parts with identification numbers and details accessories, including the drain pump cable and its compatibility.
Presents the detailed wiring diagram for Standard Extra and Flex Extra models, showing component connections and wiring paths.
Provides essential customer service information, including guarantee activation, contact numbers, website resources, and details on spares and repairs.
To Next Page
