Elementary safety-advices
Advices in the instruction manual
• The knowledge of the Basic safety advices and safety regulation are basic conditions for the
design to security using of this device in cooperation with the “Safety Regulations” on page 2.
• The instruction manual contains the core of the importants advices, to use this device in a safety
condition.
• The instruction manual, especially the safety advices, must be consider by all users, who work
with this device.
• Beyond that it must be paid attention to the valid location regulation and the provisions of the
accident control.
Responsibility of the operator
The operator are committed to let only user working, if they
• will be intimate to the basic advices for working safety and accident control. They must also be
instructed to the device application.
• have read, understood and signed the safety advices and warning notices in the instruction
manual.
The safety-conscious work from the users will be controlled in constand intevalls.
Responsibility of the employees
The employees who work on the device have to commit, before beginning the work:
• that they pay attention to the basic safety advices of work safety and accident control.
• that they have read, understood and signed the safety advices and warning notices in the
instruction manual.
Risk in using the device
The device VGX-21 has been developed based on the newest state of technology and was
constructed by the accepted safety-related regulation. However, it is possible by using the device,
that there appear some risks for the user or third persons, especially if the device is misused and
operated not accordingly to the MIRA operation manual. Only utilise the device:
• for designated use.
• in safety-related good condition.
Breakdowns are to correct immediately, if they become some vitiations to the safety-advices.
Conventional utilisation
The MIRA VGX-21 device is exclusively designed for refacing and cutting valve seats and insert-
counterbores of the cylinder heads for combustion engines. Another- or beyond going utilisation are
not intended. The Minelli Corporation will not be liable for damages which evolved herefrom. To the
intended utilisation also belongs:
• to pay attention of every advice from the instruction manual and
• to keep on the control- and service work.
To Next Page
