Need help?Do you have a question about the Mira Zest 7.5 and is the answer not in the manual?
General| Maximum Static Pressure | 10 Bar |
|---|---|
| Type | Electric Shower |
| Material | Plastic |
| Warranty | 2 Years |
| Inlet Connection | 15mm |
| Finish | White |
Appliance must be earthed as per electrical regulations.
Instructions on operating the appliance when frozen or leaking.
States no user serviceable parts are located under the appliance cover.
Advise users to read and keep the guide for future reference.
Electrical and plumbing installations must comply with UK regulations.
Essential to contact the electricity supply company for adequacy.
Lists the main shower unit and associated parts included in the package.
Lists the user guides and brochures provided with the product.
Details minimum and maximum inlet pressures and static pressure requirements.
Specifies fuse requirements and terminal block cable size limits.
Details water pressure, connection types, and pipework preparation.
Warning against installing the unit where it might freeze.
Emphasizes flushing pipework before connecting the appliance.
Advice on water treatment devices for hard water areas.
Explains the use of hose retaining rings and optional check valves.
Suggests testing plumbing connections before electrical hookup.
Adequate supply rating and potential voltage drop effects.
Instructions on earthing the appliance and supplementary bonding.
Requirement for a 30mA RCD and a double-pole switch for supply.
Specifies minimum distances and gaps for appliance and handset placement.
Steps to remove the appliance cover and service tunnel.
Instructions for connecting the mains-fed cold water supply pipe.
Bringing electrical cable into the case and connecting conductors.
Re-tightening terminal block screws and fitting earth bonding clamp.
Warning not to tile up to the case; must be fitted to a flat surface.
Ensure TOP knob is STOP and electrical supply is isolated.
Verify water flow at LOW, MEDIUM, and HIGH power settings.
Setting shower temperature using the BOTTOM knob.
Explains the basic principle of heating water via elements.
How the temperature control knob affects water flow and temperature.
Requirement for minimum pressure and thermal switch function.
Importance of keeping spray plate holes clear for performance.
Steps to switch on, set to HIGH power, and adjust temperature.
Steps to turn off the shower and main electrical supply.
Emphasizes professional maintenance for any required work.
Detailed steps for removing the flow valve and switching assembly.
Steps for refitting the flow valve and switching assembly.
Instructions for disassembling the heater tank.
Warning not to press the printed disc on the thermal switch.
Refitting the heater tank and ensuring correct wire positions.
Instructions for removing the thermal switch.
Refitting components in reverse order with correct wiring.
Troubleshooting for low water flow issues.
Diagnosing why the appliance isn't producing hot water.
Identifying causes for temperature cycling.
Addressing low flow from other outlets or low water pressure.
Troubleshooting cool showers in summer or ineffective temp knob.
Explaining why water might still flow when electrical supply is off.
A list of available spare parts with corresponding part numbers.
Important notes on assembling push-fit connectors for micro-switches.
Description and function of the DCV-H outlet double check valve.
Details on the product guarantee and its terms.
Information on how to get assistance and expert advice.
Guidance on product issues and contact details for support.
To Next Page
