Need help?Do you have a question about the Mira elite 2 and is the answer not in the manual?
General| Brand | Mira |
|---|---|
| Model | elite 2 |
| Category | Plumbing Product |
| Language | English |
Key safety rules including earthing requirements for safe operation.
Warnings regarding incorrect installation, connections, and environmental placement.
Precautions for operating the shower, including avoiding dry running and leaks.
Steps to take if specific malfunctions or damage occur, including isolating supplies.
Requirements for electrical installation, including compliance with regulations and supplier contact.
Requirements for plumbing installation, including compliance with water regulations and pipework.
List of physical parts included with the Mira Elite 2 shower unit.
List of accompanying documents such as guides and brochures.
Details on inlet/outlet connections and pipework requirements.
Information on power ratings, voltage, and cable requirements.
Details on compliance with safety standards and certifications.
Details on water supply pressure, cistern connection, and pipe diameter.
Guidance on where to install the shower unit within the shower area.
Specifications for inlet connector, outlet hose, and connection forces.
Instructions for flushing pipework and using fittings to avoid damage.
Information on preventing backflow and potential issues with checkvalves.
Advice on water treatment devices for limescale reduction and guarantee impact.
Guidance on avoiding hose kinking and managing pipe runs for head availability.
Guidance on electrical requirements, wiring, and safety for installation.
Diagrams illustrating the plumbing and electrical connections for the shower.
Step-by-step instructions for installing the Mira Elite 2 shower unit.
Procedures for connecting water supply, electrical cable, grounding, and shields.
Details on fitting the service tunnel, cover, and shower fittings.
General guidance and principles of how the shower operates.
How temperature is adjusted via the control knob and factors affecting it.
Explanation of the thermal switch and 'OVERHEAT' indicator.
General advice and cleaning procedures for shower fittings.
Procedure for removing and installing the flow valve and switch assembly.
Steps for removing and installing the heater tank and its parts.
Procedure for removing and installing the motor/pump assembly.
Detailed procedure for removing and installing the thermal switch.
Procedure for cleaning or replacing the inlet filter.
A comprehensive list of available spare parts with part numbers.
An exploded diagram showing the location of various spare parts.
Description of the double check valve accessory and its function.
Description of the fixed handset holder accessory.
To Next Page
