EasyManuals Logo

Mira elite 2 User Manual

Mira elite 2
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Introduction
Section
1
Thank you for purchasing a quality Mira product. To exploit the full potential of your new
product, please take time to read this guide thoroughly, having done so, keep it handy for
future reference.
The Mira Elite 2 is a high performance tank-fed (cistern-fed) pumped electric shower for
use where the mains water supply pressure is too low, unreliable or non existent, to
operate a conventional electric shower.
The Mira Elite 2 features an internal pump unit which has been designed to provide all year
round performance, even at the highest flow rates which are necessary during the summer
months. The Elite 2 has separate controls for power selection and temperature/flow
adjustment. The Elite 2 MUST have its own separate cold water supply from the cistern
to ensure correct operation.
Mira Elite 2, 9.8 kW @ 240 Volts white/chrome finish
Mira Elite 2, 9.0 kW @ 230 Volts white/chrome finish..
If you experience any difficulty with the installation or operation of your new shower
control, then please refer to the Maintenance and Fault Diagnosis section, before
contacting Kohler Mira Limited. Our telephone and fax numbers can be found on
the back cover of this guide.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mira elite 2 and is the answer not in the manual?

Mira elite 2 Specifications

General IconGeneral
BrandMira
Modelelite 2
CategoryPlumbing Product
LanguageEnglish

Related product manuals