Miracle LIB-053 - Page 25

POLY CRAWL TUNNEL
Item Description Qty
Specifications
1
Poly Crawl Tunnel
1
2
Tube Slide Entry Panel
2
Materials:
3
M10X25mm Torx Bolt
40
4
Flat Washers M10
72
5
Nyloc Nut M10
32
Colour: Optional
Finish: Powdercoat
Fasteners:
Stainless Steel
Application:
Maintenance
All fasteners should be regularly
checked and retightened, if necessary,
1 week after installation.
Ongoing maintenance intervals will vary
according to the amount of use the
equipment receives.
Recommend inspection intervals every 3
months.
* Wear Item - Refer Warranty
Installation Instructions:
1. Refer to the plan view for position of Crawl Tunnel.
2. Lift the Tunnel into position between the two uprights and
secure with for Torx Bolts with Flat Washers under the
heads at each end.
3. Ensure all bolts are fully tightened.
Note:
In-ground Upright depth may vary
depending on Softfall
- Sand/Mulch/Grass–700mm (Pictured)
- Rubber – 500mm
+ 300mm Added to Upright depth if
component is Freestanding
+ Use ID tag as reference.
Age Groups:
3-7 Years
7-15 Years
STRUCTURE: ____________________
DATE: ___________
MIRACLE: ______________________ DATE: ___________
Doc No. TN
-
01