Mirae Mx Series - Page 300

Mx-Series Manual
3 REGULAR
MAINTENANCE
Table of Contents
REGULAR CHECKLIST BY PERIOD....................................................................3-2 REGULAR
CHECKLIST BY UNIT...........................................................................3-3
REGULAR CHECKLIST FOR
GREASING...........................................................3-4
3-2
Regular Checklist by Period
Period
Item
Checking Point
Module
Ref
24H
(Daily)
Air pressure check (before
running)
1. Main Air
2. Head blow pressure
3. Head suction
pressure
Cover
4-3
Linear motor stator (before
running)
Check foreign materials
between stator magnets.
Conveyor
4-4
Machine interior check
(before running)
Check foreign materials at
the driving unit.
Conveyor
4-5
Abnormal noise check (after
running)
Check abnormal
noise/vibration caused in
the X, Y-axis linear slideand
conveyor assembly.
X-Y Gantry
Conveyor
4-6
150H
(Weekly)
Camera Lens
Check the camera lens.
Vision
4-7
Nozzle Check
Prevent introduction of
foreign materials.
Head
4-9
Fan-filter Check
Check cleanness of the fan-
filter.
Cover
-
500H
(Monthly)
Linear Scale Check
Check foreign materials on
the Linear Scale.
X-Y Gantry
4-20
CHAPTER