Mirae Mx Series - Program Installation; Chapter 3. SOFTWARE and HARDWARE INSTALLATION

3-2 Offline Feeder Setup Manual
SOFTWARE AND
HARDWARE INSTALLATION
It is recommended to
install the program within
the same directory as the
mounter MMI directory.
Program Installation
For normal operation of the entire program, you shall perform the
following steps to install program, and then perform Bar Code Printer
Driver Installation (page 3-4) and Bar Code Reader Setup (page 3-
5).
1. Open "Offline Feeder Setup" folder, and run "SETUP.EXE".
2. "Welcome" window appears. Then, click Next.
3. "Choose Default Location" window appears. Then, select the
directory in
which the program is to be installed, and click Next.
4. "Start Copying Files" window appears. Then, click Next.
5. When "Setup Complete" window appears, click 'End'. If you want
to run Read Me or the program directly, click the button at the
center of the window.
6. When the program is completely installed, Offline Feeder Setup
icon is created in Windows  Start Menu  Programs  Offline
Feeder Setup folder and the background screen.
7. Click the Offline Feeder Setup icon or Windows  Start Menu 
Program  Offline Feeder Setup  Offline Feeder Setup menu at
the desktop.