Need help?Do you have a question about the Mirae Mx200 and is the answer not in the manual?
Describes safety warning labels on the front of the machine.
Details safety warning labels on the rear of the Mx400.
Lists general safety instructions for operating the system.
Lists precautionary measures to avoid potential issues or damage.
Provides general specifications for the C-Feeder.
Details the key features of the Mx-Series system.
Highlights the high performance aspects of the system.
Discusses how the system achieves high productivity.
Describes the intuitive and easy-to-use interface.
Explains the factors contributing to the system's high reliability.
Lists the detailed technical specifications of the Mx-Series.
Describes the process of moving and setting up the system.
Provides a checklist for confirming the machine setup.
Checks machine leveling and balance.
Details how to check and adjust machine leveling.
Checks conveyor and reference marks for accuracy.
Checks machine parameters and software versions.
Details the structure and configuration of the Mx-Series SMD Mounter.
Explains the system's structure and its division into five systems.
Describes the step-by-step operation flow from component feeding to PCB transfer.
Outlines the work flow for single and dual conveyor systems.
Summarizes the PCB conveyor specifications.
Describes the feeder base configuration, structure, functions, and features.
Describes the structure, features, operability, productivity, and safety interlock of the trolley.
Details the structure and features of the intelligent feeder.
Describes the functional and mechanical configuration of the positioning system.
Describes the structure, function, features, and specification of the XY gantry.
Explains the vision system's purpose and structure.
Outlines checks and procedures before switching on the machine.
Provides safety instructions for operation.
Details the operational procedure for the machine.
Describes the procedure for turning on the PC power.
Details the procedure for powering on the main frame.
Outlines the procedure for performing a test run of the system.
Shows the overall work flow for programming.
Details how to enter pick data for components.
Describes how to directly enter place data.
Describes the process of checking the created data.
Initiates the optimization process for the program.
Describes the line optimizer for optimizing individual lines or mounters.
Introduces the Mirae Optimizer Phoenix software.
Allows setting up machine units for optimization.
Describes the state of the Program Editor after optimization.
Checks pick & place position and compensates with offset.
Checks and modifies placement positions using teaching.
Checks placement position via vision monitor and modifies with teaching.
Describes the three production modes: RUN, Dry Run, and Bypass.
Details the parameters for the Production Run main menu.
Covers setting the machine type.
Checks options and parameters.
Describes the offset camera calibration for setting origin offset.
Lists error codes and their descriptions.
Provides actions and references for resolving various errors.
Lists the specifications for Mx100/P models.
Lists the specifications for Mx200/P/TP models.
Lists the specifications for Mx400(S)/P(S) models.
Details the procedure for setting the reel to the feeder.
Explains how to mount the feeder onto the feeder base.
Provides a list of error codes and their solutions.
Lists critical points to check before starting production.
Highlights routine inspection points and tips for production.
Provides precautions when using modified feeders.
Details routine inspection items and their methods.
Explains how to effectively use the Offline Feeder Setup program.
Describes the parts and functions of the machine.
Explains the maintenance procedures for the MS1 system.
Provides a checklist for regular maintenance.
Specifies the environmental conditions for setup.
Describes the procedure for machine setup.
Details the steps for setting up the machine.
Lists items to check during setup.
Describes how to move and mount the MS1 unit.
Details the steps for attaching the clamping base and inserting the tray feeder.
Lists final checks for setting up the MS1.
Covers preventive maintenance for the MS1 system.
Lists final checks for setting up the MS1.
Summarizes routine checks and their periods.
Provides a regular checklist categorized by part.
Covers preventive maintenance for the MS1 system.
General| Brand | Mirae |
|---|---|
| Model | Mx200 |
| Category | Industrial Equipment |
| Language | English |
To Next Page
