Chapter 4 How To Use Program 4-13
displays the result as shown in the following figure. In this Status Display
window, you can update the feeder data by reading PRG or clicking Read
Feeder button.
Feeders placed without PRG : Gray Feeders set
as not to be used in PRG: Gray Feeders with no
feeders placed : Yellow Feeders with different part
numbers: Aqua Feeders with different widths :
Purple Feeders with different pitches : Olive
Feeders with different remain counts : Fuchsia
PRG data and feeder data are the same: Blue, Navy
<Fig. 4-8ᆞ Status Display Window>
Options Setting
Click image at the right top of the program screen and enter the
password, and Barcode Format page where you can select the
input/output barcode formats and Option page where you can set options
appear.
Barcode Format
Barcode Format Page
This page is used for selecting the input and the output barcode formats.
You can select the format for the output barcode to be printed, either as
the predefined one-line format or the two-line format of PartID and
Remain#. For the input barcode to be read by the barcode scanner, you
can select one among the predefined one-line format, the two-line format
with PartID and Remain#, and one-line user-defined format including
PartID and Remain#.
To Next Page
Loading...
