Chapter 4 Regular Chec4k- 4-35
Z-axis Linear Slide check
Module: Head
<Precision Head>
Periodic cleaning and greasing is required for the Z-axis Linear
Slide. Carry out cleaning and greasing as follows.
Check Procedure
1. Unplug the machine.
2. Lift the nozzle by hand as far as possible.
3. Wipe grease and dust from the X-axis Linear Slide using a clean
soft cloth.
4. Apply a thin layer of grease along the longitudinal direction of the
linear slide.
Air Filter check
Module: Cover
To Next Page
Loading...
