Chapter 2 Program
Functions and
Hardware
Specification 2-3
Parallel port,
Windows 2000 Pro
(or Windows NT 4.0)
driver
Part Bar Code
label size:
93(W)*25(H) mm
Feeder No. Bar
Code label size:
50(W)*12(H) mm
Bar Code
Printers supported
by this software:
1. SATO CT400,
or the
printer compatible with this
2. ELTRON TLP2742, or the printer compatible with this
3. Printer driver should be installed, under the same name as one of those two models
above.
2-4
Bar Code Reader (BCR)
Over 95 mm scan width
Keyboard wedge type
Code 93
PS2 Connecting type
Test-completed Bar Code Readers
1. Intermec: Scan Plus 1800-SR (CCD type)
Computer Specification
To use this program, the computer with the following
specification is required:
Pentium III 600, 128M, Monitor (1024*768)
Recommended
One serial (female PS2) port and one parallel (male
DB25) port
Windows 2000 Pro (or Windows NT)
Lan Card, Sound Card Recommended
To Next Page
Loading...