Chapter 4 How To Use Program 4-5
Exit
If Save button has been enabled, Save checkbox appears and if the
program is communicating with the feeder, the communication is
automatically terminated.
UTIL MENU
Util menu has Barcode Print and Environment Setting submenus as
shown in the following figure, and the toolbar has the buttons of the
same
functions. The function of each menu is described below.
Barcode Print
If you click this button, the window appears to display part barcode
and feeder number barcode.
See the section on Barcode Print window in page 4-5.
Environment Setting
If you click this button, the window appears to set feeder
communication parameters and set up the barcode printer.
See the section on Environment Setting in page 4-7.
In addition, when you
print a barcode, you can
read the barcode of the
format set in the option,
so that the part name and
quantity can be specified
automatically.
Barcode Print
Window
Barcode Print
window has
Print, Setup
and Close
buttons as
shown in Figure 4-2, at the bottom of which the status bar showing
the current printer status is displayed.
This window contains the image of the barcode label (barcode
image, part name and quantity) to be printed actually, and Feeder
No, Previous, Print All, Next, Print only existence feeder, and Print
only usage feeder buttons, of which meanings are described in the
following table.
If the cell selected in the table in the main window is PRG data
feeder, the buttons at the bottom of the window are enabled.
Otherwise, they are disabled and the part name and quantity of the
label image are enabled, to print a barcode.
Print
Printing the barcode with the values set to Part # and
Q’ty# Setup
Opens ‘Set Printer Type and Parameters’ window.
To Next Page
Loading...
