Mirae Mx200 - Checking the blowing level at the nozzle tip

4- 12 Mx-Series Manual
5. Check appearance of the nozzles.
-A nozzle with coating removed from the tip is treated as bad
because it may cause vision error.
Breakage, Foreign Material Uncoated
6. Insert the cleaned nozzles into the sockets.
Checking the blowing level at the nozzle tip
The blowing level at the nozzle tip may affect the placing accuracy
of the device. Check the blowing level at the nozzle tip before
starting a task.
-
A nozzle with a destroyed tip is treated as bad
.