5-18 Mx100/200 Series Operation Manual
This command is used to turn off the main power after switching off
the Power Box.
MrFTP Setting
The MrFTP program supports file transfer between the MMI and the MCS
(Main Control System). To send or receive files, User ID and password
should be entered to access the MMI (Remote Host Computer).
This program automatically runs when the Windows starts. If it does not
automatically runs, run the execution file (MrFTP.exe) in the default folder
C:\alpha\.
<Figure 3-12 가 MrFTP main window >
The main window shows connection with the MCS. If no message is
displayed or connection is abnormal, stop and move to the environment
setting window.
To Next Page
Loading...
