2. Setting the
Film
Speed.
---------------------------------
32
------:Y--::::==:::-~
40
----,7-''''-
64
-
--+.'--
1
25
---I'I--j.
160
250
--n
C--L
320
----\-\---\<
500
---\\---''''
650
-----''''''"/
1000
-
------"
y.."
1300
------~::::::==:::::;:;:;.----
The
CdS meter
of
the
MIRANDA
Sensorex
is
coupled to the film speed dia
l.
After loading
the film, therefore, see
that
the film speed
dial
is
set properly. Failure to adjust this dial
according to the speed rating
of
the film loaded
in the camera will prevent the meter from
gil'ing correct exposure reading.
•
Lift
and
turn
the knurled outer ring
of
the
shutter dial in either direction until the
desired figure comes directly opposite the
indicator.
• It
is
unnecessary to re-adiust the
fi
lm
speed
dial unless film
of
a different speed rating
is
loaded in the camera.
•
The
same film speed setting
is
emp
loyed
when using filters or in close-ups and photo-
micrography.
• Intermediate settings on the dial denote film
speeds gil'en in the illustration.
To Next Page
Loading...
Need help?
General
