⑦
Step 1: Switch to Miracast mode by pressing button
Step 2: for Window 10, launch the “Windows Start Menu >
Settings > Connected devices > Add a printer or scanner”, and
then search for MiraScreenDongle. After that, you may start to
mirror（Refer to Picture⑦）.
For Windows 8.1, launch the “Windows Start Menu > Settings
> PC and devices > Devices > Add a device”, and then search
for MiraScreen Dongle. After that, you may start to mirror.
Connect to WiFi Router
Step 1: Switch to Airplay mode by pressing the button, and
then get the IP address of your MiraScreen on screen.
Step 2: Use the browser on your device to accessthe IP
address of MiraScreen, and select your WiFi router.
Step 3: Enter password.
Step 4: Connect to your WiFi router.
Setting and Firmware Upgrade
To Next Page
Loading...