⑧
After connected with MiraScreen, an IP address will be
shown on setup screen. Please launch browser on your
devices (iOS/Androd/Mac/Windows etc.) and then enter the IP
address accordingly (ex: 192.168.203.1) （Refer to
Picture⑧）
• Internet: Setup the router connection for your MiraScreen.
(Note: The connection between MiraScreen and your
device may be disconnected when you switch to router
connection)
• Language: Change the language of MiraScreen
• Password: Change the password of MiraScreen
• Default Mode: Select AirPlay or Miracast as boot up default
mode
• Resolution: Change output resolution of MiraScreen
• Upgrade: upgrade the firmware of MiraScreen. Note:
Required Internet connection on yourMiraScreen Dongle.
IMPORTANT! Please upgrade to the latest version in order
to compatible with up-to-date devices.
To Previous Page
Loading...