Mircom FleX-Net User Manual

98
Attached Fire Alarm
Communication Protocol
Level 0, Level 1, Level 2 or Level 1G. Only Level 2 (FX2000) is appropriate.
Checksum
8 Bit / 16 Bit. For FX2000 16 bit is appropriate.
Event Format
Ckt No / Loop Addr. Specifies whether the internal Ckt No or a combination of Loop
and Address is sent to the monitoring station.
Output Offset
0-9999. This value is added to outputs to differentiate them from inputs with the same
Ckt No.
Report Priority
Alarm
Choose one of the two accounts to use to report Alarms
Supv
Choose one of the two accounts to use to report Supervisory alerts
Trouble
Choose one of the two accounts to use to report Troubles
Timers
AC loss delay
0-20 hours, tells the dialer how long to wait after an A/C power loss before reporting
the trouble.

Mircom FleX-Net Specifications

General

Brand	Mircom
Model	FleX-Net
Category	Fire Alarms
Language	English