Why is the red indicator flashing on my Miroco MF005 milk frother?
The red indicator light flashes because the milk jug is not being detected. To resolve this, make sure the milk jug is firmly placed onto the power base.
Why is my Miroco Kitchen Appliances milk not foaming properly?
Several factors can prevent milk from foaming correctly. Use cold, fresh (or freshly opened) milk. Do not attempt to re-foam milk that has already been heated. Try reducing the amount of milk in the jug or using a different type of milk. You can also experiment with different milk and frothing whisks to achieve the desired result.
What to do if my Miroco MF005 Kitchen Appliances milk is not heating?
If your milk is not heating, ensure the milk jug is correctly positioned on the power base and that the milk frother has been properly turned on.
How to fix a Miroco Kitchen Appliances frothing whisk that is not moving?
If the frothing whisk isn't moving, stop the operation. This can happen if the frothing whisk is not placed correctly, if it was taken out during operation, or if ingredients were added too quickly. Place the frothing whisk inside the milk jug before turning on the milk frother. Remove any liquid from the milk jug. Refill the milk jug with liquid. Start frothing and then add ingredients (if desired) slowly and in small quantities after the milk has already started frothing.
Explains how to select different operating modes for the milk frother.
Details how the device detects the correct placement of the milk jug.
This document outlines the features, usage, and maintenance of the Milk Frother (MF005), an appliance designed for household use to froth and heat milk and other dairy milk alternatives. It is not intended for commercial or industrial use.
The Milk Frother is primarily used for frothing and heating milk. It offers several modes to cater to different preferences:
The appliance operates with a power button that allows users to cycle through these modes. Each mode is indicated by a corresponding icon that lights up. The frother also includes a milk jug detection feature, ensuring it only operates when the jug is correctly placed on the power base.
To use the Milk Frother, first ensure the frothing whisk is securely placed inside the milk jug. For chocolate milk, the frothing whisk should be used with the chocolate cover. Pour milk into the jug, being careful not to exceed the maximum fill levels specified for each function (e.g., MAX Level for Heating is 500ml, MAX Level for Frothing is 250ml). For chocolate milk, add 500ml of milk and 60g of chocolate powder, ensuring the frothing whisk remains in the jug for better mixing.
Once the milk and whisk are in place, press the Power Button to turn on the frother. Within 2 seconds, press the button again to cycle through the available modes until the desired mode is selected. The selected mode's icon will light up red (for heating/frothing) or blue (for cold frothing) to indicate operation.
During operation, the milk frother provides audio alerts: a single beep when plugged in, when a mode starts, or when the milk jug is removed. It beeps three times upon completion of a selected mode. These sounds can be muted by pressing and holding the Power Button for 3 seconds.
After the frothing or heating process is complete, the indicator light will flash red or blue for 30 seconds and then turn off. If the milk jug is removed before the light turns off, all red lights will flash for 5 minutes until the power is cut off or the jug is returned to the power base.
For optimal results, it is recommended to use long-life (UHT) milk with high protein content. If using non-dairy milk, a Barista-style non-dairy milk is suggested for better froth. Milk should be taken from the refrigerator immediately before frothing, ideally at 4~6°C (39.2~42.8°F), as colder milk yields better froth. The milk can heat up to 70±5°C (149-167°F), which is considered the optimal drinking temperature without destroying milk nutrients. The frother can also froth frozen milk, though it will generate heat and not produce frozen milk foam.
Proper cleaning and maintenance are crucial for the longevity and performance of the Milk Frother. The milk jug and frothing whisk should be cleaned immediately after each use to prevent milk residue build-up.
Before cleaning, always unplug the power cord from the outlet and allow the appliance to cool down. The milk jug and frothing whisk will be hot immediately after use, so handle them carefully. Remove the milk jug from the power base and fill it with tap water. Once cooled, remove the frothing whisk and rinse off any milk in warm water.
Wash the milk jug, jug lid, and frothing whisk in warm, soapy water, then rinse and dry thoroughly. These parts are also dishwasher safe. The exterior of the power base should be wiped with a soft, damp cloth and then dried thoroughly.
Store the cleaned milk jug, jug lid, and frothing whisk in a safe place, out of reach of children.
General| Category | Kitchen Appliances |
|---|---|
| Timer | No |
| Control Type | Button |
| Material | Stainless Steel |
| Color | Silver |
| Product Name | Miroco MF005 |
To Next Page
