TABLE OF CONTENTS
1. Safety - Warnings and Precautions 1-1
2. Getting Started 2-1
Inspection 2-1
Power Requirements 2-1
Placement of Equipment 2-1
System Components Diagram 2-2
3. Specifications for XL2020, XL2015 & XL2010 3-1
4. Description of Major Components 4-1
Generator (Power Supply) 4-1
Process Control Features of Model XL2020 4-1
Process Control Features of Model XL2015 4-1
Convertor (Transducer) 4-2
Horn (Probe) 4-2
Replacement Flat Tips 4-2
5. Function of Controls and Indicators 5-1
XL2020 Functions 5-1
XL2020 Controls and Indicators Diagram 5-2
XL2010 & XL2015 Functions 5-3
XL2010 & XL2015 Controls and Indicators Diagram 5-4
6. Preparation for Use 6-1
Convertor Mounting Diagram 6-2
Removal and Attachment of Horns and Tips 6-3
Removal and Attachment of Horns and Tips Diagram 6-4
7. Tuning Instructions 7-1
XL2020 Tuning Instructions (Probes & Horns) 7-1
XL2010 & XL2015 Tuning Instructions (Probes & Horns) 7-2
Microtip
TM
and Cup Horn Instructions 7-3
8. Programming the Microprocessor of XL2020 8-1
Review of Keys 8-1
Keypad Diagram 8-1
Continuous Mode 8-2
Timer Mode Only 8-3
Pulsar
TM
Mode Only 8-4
Timer and Pulsar
TM
Mode 8-5
Storing Programs into Memory 8-6
9. Accessories 9-1
Cup Horn 9-1
Installation 9-1, 9-2
Operation 9-2
Output Setting Parameters 9-2
Maintenance 9-3
Continuous Flow Cell 9-3, 9-4
Microtip
TM
9-5
To Next Page
Loading...