Mistral MKA24KY21 - Technical Specifications; Care and Cleaning; Disposal

7
Auto-off:whentheapplianceisON,pressthe
Timer push button. The timer icon is displayed
together with the time remaining before the
appliance goes off. To set the timer, use the
adjustment buttons and , then wait a
fewsecondsforthesettingtobememorized
(timervaluestopstoashfor2secbeforeit
getsmemorized).Oncedonethetimericon
is shown during the normal operating mode,
indicating that the timer has been set. When the
programmed time is reached, the appliance is
turned off automatically.
Togobacktooperationwithoutthetimer,
press the timer button twice. The timer symbol
disappears from the display.
TimerSteps:0.5Hr(30minutes),1Hr,2Hr,3Hr,
4Hr...23Hr,24Hr,0.
Everytimethebuttonispushedtheappliance
emit“beep”sound.Thisfunctioncanbe
activated/deactivated:whenproductisworking
byrepeatedlypressing“-”pushbuttonuntilthe
displaywillshow“b0”or“b1”ashing.Press“-”
pushbuttontoselect“b0”(beepoff)or“b1”
(beep on); waiting a few seconds for the setting
to be memorised.
Thermal Cut-Out
AThermalCut-Outisbuiltintothisheaterto
minimisetheriskofoverheatingandmaximise
safety to users. A heat sensing device monitors
internal temperatures in the appliance. If heat
levels rise beyond a preset safety threshold
theCut-Outwillswitchoffpowertotheheat
elements, eliminating further danger. Let the
heatercoolforapproximately10minutes,thenit
will function normally again.
IntheeventofaThermalCut-Outcheckfor
visible obstructions to air inlets. Try moving
the appliance to a new position. Sometimes
placement close to walls and furniture can restrict
air movement enough to cause the heater to
shut down.
Safety Tip-Over Switch
Thisapplianceisttedwithasafetytip-over
switch which automatically turns the unit off when
it is tilted or tipped over. Always ensure that the
unitisplacedonatsolidgroundbefore
operating.
Technical
Specications
PowerSupply:AC240V~50Hz
PowerConsumption:2400W
NOTE: As a result of continual
improvements, the design and
specications of the product within may
differ slightly to the unit illustrated on the
packaging.
CareandCleaning
• Before cleaning, ensure that the heater is
switched in the off position and is unplugged
fromthesocket.
• Cleantheexteriorsurfacesoftheheaterwith
a dry, soft cloth.
• Neveruseanyformofdetergentsorsolvents
to clean the heater.
• Neverspraywithliquidsorsubmergeinliquids
or water.
• DONOTattempttocleantheinteriorofthe
heater.
• DONOTATTEMPTTOOPENTHECASEOFTHIS
HEATERatanytime.Therearenoconsumer
serviceable parts inside this unit.
• When the heater is stored during the off
season, neatly wind the power cord around
the base of the heater to prevent any
damage to the power cord.
Note: If the power cord of the appliance
becomes damaged discontinue use.
Disposal
Donotdisposeofpackagingortheproduct
through your household waste!
Theproductandpackagingaremadefrom
recyclable materials (plastics, metals, paper).
If the product is no longer suitable for use
dispose of it in an environmentally friendly
manner in accordance with your local council
regulations.