5
Remove the cable tie and unravel the cordset before
operation.
Plug the power cord into a standard domestic
power outlet.
Turn the control dial clockwise to LOW for a low speed
,
MED for a medium speed and HIGH for a high speed.
To switch the Pedestal Fan off, turn the control dial
anticlockwise to the 0 position.
Care and Cleaning
Turn the control dial to the 0 position and unplug the
Pedestal Fan from the power outlet before cleaning.
Use only a soft, damp cloth to clean the Pedestal Fan.
Do not immerse the Pedestal Fan in water and never
allow water to drip into the motor housing.
Do not use gasoline, paint thinner or other chemicals.
To clean the blade assembly, loosen the screw in the
grille ring (Fig. 3) and remove the front grille.
Fig. 3
Wipe the blade and the front and back grilles.
Reassemble the Pedestal Fan by snapping the front
grille into place
Store the Pedestal Fan in its original box or cover it
to protect it from dust. Store it in a cool, dry place.
Never spray with liquids or submerge the Pedestal
Fan in water or any other liquid.
Note: If the cordset of this appliance becomes
damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
MPF40HV
3 Speed, 40cm Pedestal Fan
For indoor use only.
230-240V a.c., 50Hz, 110 Watt
Approval no. S/1
Operation of your
Pedestal Fan
Specifications
To Next Page
Loading...
