4
Maintenance and Cleaning
1. Unplug the product before cleaning. After the motor is cooled down, use a cloth to clean the grille and
product surface
2. Do not use wet cloth or pour water on the product when cleaning. Excess water may enter the motor
and cause electric shock
3. Do not use any corrosive cleaning solution to clan the appliance
4. Do not use the appliance with metal scouring pads as it may scratch the surface
5. Do not immerse the appliance in water or other liquids
Operating Instruction
- You can either control the fan by using remote control or select your options from control panel
Remote control
- The remote control can be operated within 3.5 – 5 meter radius
- Light Mode : by default the Light is ON, you may press at the button to OFF the light
- You may refer to other functions of the Remote control as per below :-
a) Power switch & wind speed
a. At Control Panel, you may turn the rotary knob clockwise for the speed selection. It has 8
selection of speed control
b) Lift / Right Swing
a. Quiescent state during initial settling.
b. Press the button for Lift and Right selection
c) Up / Down Swing
a. Quiescent state during initial settling.
b. Press the button for Up and Down selection
Note : do not adjust up and down swing angle with hands
d) On / Off Timer Function
a. At Standby Mode, you can preset the fan to be on at longest 4 hours
b. You can set the OFF timer to longest 7 hours.
c. LED light will display the selected timer
e) Mode
a. By default, it is normal mode which LED light is off
b. You may press the Mode button for mode selection : Normal / Natural / Sleeping mote. LED
Light will shows the mode selection
To Next Page
Loading...
