must provide this option and corresponding
voice samples must have been recorded.
Step-1 Enable voice recognition function
of your mobile and set the mobile to
handsfree state.
Step-2 When no call is in progress, press
and hold the answer/end button for 3
seconds until you can hear beep sound
from the headset.
Step-3 Speak out the name of the person
you wish to call loudly.
7.6 REDIAL
Press + key 3 seconds and you can hear
beep sound from the headset. Release the
button and the headset will dial the last
diaIndicator light telephone number.
7.9 ADJUST THE EARPHONE VOLUME
Press the volume + key to increase or - to
decrease the volume during a call.
7.10 SWITCH THE CALL BETWEEN
MOBILE AND HEADSET
In call state, press and hold the answer/
end key for about 3 seconds until there is
beep sound from headset. The call will be
To Next Page
Loading...