Mitel 5614 Quick Reference Card

QUICK REFERENCE GUIDE
Mitel 5614 Quick Reference Card
Mitel (design) is a registered trademark of Mitel Networks Corporation. All other products and services are the trademarks of their respective holders.
© 2017, Mitel Networks Corporation. All rights reserved.
Display Icons
1 Multifunction/Alarm Button
2 Earpiece Speaker
3 Volume Up
4 Volume Down
5 Mute and PTT Button
6 Softkeys
7 Off-Hook Key
8 Five-way Navigation Key
9 Voice Mail Access
10 Key Lock and Upper/Lower Case
11 Microphone
12 Space
13 Sound Off key
14 Tactile Indicators
15 End and On/Off key
16 Color Display
17 Headset Connector
Signal Strength
Read Message
Voice Mail
New Colored Message
Microphone Off/Muted Missed Call
Loudspeaker On
Incoming Call
Loudspeaker Off
Outgoing Call
Sound Off
System Connection
Headset Connected
Key Lock
New Message
Phone Lock
New Message, Important
Bluetooth
Bluetooth Headset Profile Active
ABC DEF
GHI JKL
PQRS TUV WXYZ
MNO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Turning the Handset On/Off
1. Press and hold the On-hook key until
“Switch on/off is displayed.
2. Press “Yes/No.”
Making a Call
Dial the number and press . The name of
the called party is displayed if available.
OR
Press to open the call list and use the
Navigation key to scroll the list of your last
twenty calls. Press to dial.
OR
1. Press the Menu softkey.
2. Select Contacts, and select Call contact.
3. Select contact from list.
4. Press or Call to dial the number.
Answering a Call
• Press to answer a call in normal mode.
OR
• Press the Handsfree key to answer in
speaker mode.
Ending a Call
• Press to end a call.
Placing a call on Hold
1. Press the More softkey.
2. Select Hold/Retrieve to put the call on hold.
To retrieve the Held call:
1. Press the More softkey.
2. Select Hold/Retrieve to retrieve the call on
hold.
Transferring a Call
1. Press the More softkey.
2. Select Transfer to New Call.
3. Dial the number to which you want to transfer
the call and press Call.
4. Select Release to connect the two parties.
OR
Wait for an answer, announce the transfer
and then select Release.
Conference
1. Press the More softkey.
2. Select New Call to put the current call on
hold.
3. Dial the number of the third party.
4. Wait for an answer.
5. Press More and then select Conference
Call to conference all the parties together.
Rejecting a Call
• When the ring signal sounds, press Call
information will be stored in the Call list.
Adjusting Volume Levels
To adjust earpiece volume during a call:
• Press upper and lower volume
buttons to increase/decrease volume.
To change ringer volume:
• In the menu, select Settings.
• Select Sound & Alerts.
• Select Volume.
• Use the navigation key arrows to adjust
selected volume and press Back to save.
To turn Loudspeaker on/off:
• Press the Handsfree key before or
during a call.

Mitel 5614 Specifications

General

Brand	Mitel
Model	5614
Category	Cordless Telephone
Language	English