Operation and Maintenance
258
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Event messages menu item
Tab. 111 Event messages display
The event messages are identical to the displays obtained when entering the con-
figuration with System Assistant on the Office 45. They are stored in event table 4
(see "Event message concept", page 232). The entries in the Maintenance menu re-
main stored until they are deleted with the Delete command.
Remarks
• The display on the event message header line ("1") indicates the number of
event messages that have occurred (max. 255). You can use the cursor keys to
scroll through the lines (not visible) (e.g. 4 events 1/2: 2 events on page 1,2
events on page 2)
• The last 254 entries can be displayed.
• The event entries record only the time of the error incident, not the time at
which it was remedied.
• More detailed information on triggering and printing event messages can be
found in "Event message concept", page 232.
See also:
Event messages can also be called up in WebAdmin (see "Signal desti-
nation Event Log", page 248).
6. 6. 3. 5 Measuring equipment for cordless systems
The aids required for measuring out DECT systems are described under “Planning
DECT Systems” in the User’s Guide.
== EVENT MESSAGES
01/12/2010 00:01 OUTG. CONN. REJECTED ON LINE 12.25
02.12.10 09:15 TOO MANY EVENT MESSAGES
To Next Page
