9/1553-ANF 901 54 Uen L1 2016-03-09 36
C
ALL FORWARDING
As a reminder that your telephone has external follow-me a text message is shown in
the display, a special dial tone each time you lift the handset to make a call and the
follow-me lamp is lit.
6.3.1 ORDERING EXTERNAL FOLLOW-ME FROM YOUR PHONE
Follow-me key
This key is used for indication that Follow-me is activated.
Using a procedure
1) Lift the handset (dial tone).
2) Dial *22#.
3) Dial route access code and external number# (the special dial tone and the follow
me lamp is turned on).
4) Replace the handset.
6.3.2 CANCELING EXTERNAL FOLLOW-ME FROM YOUR PHONE
Follow-me key
Press the follow-me key (the follow-me lamp is turned off).
Using a procedure
1) Lift the handset (dial tone).
2) Dial # 22 # (dial tone and the follow me lamp is turned off).
3) Replace the handset.
6.3.3 ORDERING EXTERNAL FOLLOW-ME REMOTELY
With this feature you can order external follow-me of any extension number from any
telephone.
The prerequisite is that all the involved telephones have the right service profile.
To order programming of external follow-me for another extension, do the following:
1. Lift the handset and wait for a dial tone.
2. Dial *22* extension number to divert # route access code and the external
number #
3. Replace the handset.
The Follow-me key is lit and the and the display shows the external follow-me
text, on the telephone that has been diverted.
6.3.4 CANCELING EXTERNAL FOLLOW-ME REMOTELY
To cancel the remote programming of external follow-me for another extension, do the
following:
1. Lift the handset and wait for a dial tone.
2. Dial #22* diverted extension number #.
3. Replace the handset.
To Next Page
Loading...
Need help?
General
