MITEX SITE - Page 8

.. _ ~~· ,....~ .. ' - .... -..-,,.""~~<I"".._~ .. ,, '
· Accessories installation
Installing/Removing the Antenna
Screw the antenna into the connector on the top of the radio by
holding the antenna at its base an d turning it clockwi se until it is
secure.
(See illustra ti on 4)
To remove the antenna. hold the antenna at its base and turn it
counter-clockwise
until 11 is released from the thread.
(See illustration 5)
Figure 4 Figure 5
5
-