Storage
• Remove the spark plug, pour a small amount of oil into the cylinder. Rotate the crankshaft several
times using the starting rope in order to distribute the oil. Put the spark plug back in.
• Remove the fuel from the machine.
• Check the Multi-Tool for damage or problems at the intervals shown in the service schedule.
Hedge Trimmer Blades
• After each session of operation, oil the cutting blades with light oil.
Hedge Trimmer Gearbox Lubricant
• Always be sure to use lithium based grease.
• DO NOT force grease into the gear box, apply 2 or 3 pumps of grease every 15 hours of operation.
Grease Fittings
To Next Page
Loading...
