28PP Pole Pruner
18
Original Instructions Version December 15
• When storing the pole pruner attachment, to prevent oil from seeping through the pump, either
1) Empty the oil tank.
2) Lay the pole pruner attachment with the tank facing down.
Operation
Adjusting the angle of the cutter head
A. Stop the engine.
B. Always wear gloves when adjusting
the cutter head.
C. To adjust the angle of the blade pull
the locking lever (1) back to release the
locking pin from the metal angle
selector (2).
4. Move the gearbox (3) to the desired
angle and release the locking lever (1).
5. Ensure the locking pin (4) is securely located in the angle selector (2) before using.
To Next Page
Loading...