28PP Pole Pruner
3
Original Instructions Version December 15
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could
lead to serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure,
breakdown, or damage.
This mark indicates hints or useful directions in the use of the product.
IMPORTANT
!
NOTE
Component Location
1. Fuel tank – 2 stroke mixture.
2. Engine starter/Recoil.
3. Carburettor / air filter.
4. Safety lever.
5. Throttle control lever.
6. Ignition switch.
7. Harness hanger.
8. Loop handle.
9. Transmission shaft.
10. Attachment shaft.
11. Gear box.
12. Oil tank for lubrication.
13. Guide Bar.
14. Saw chain.
15. Coupling.
16. Extension Shaft (Included)
17. Rubber Grip