455CSX / 515CSX PREMIUM Chainsaw
20
Original Instructions Version July 18
455CSX/515CSX_030718
Maintenance
• After every use, check that all nuts, bolts and screws are securely fastened and
tighten if necessary.
• In the event of an accident, breakdown or blockage, ensure the engine is turned o
before any work is carried out to rectify this.
• Make sure the engine has stopped and is cool before performing any service to the
machine. Contact with moving cutting head or hot muer may result in a personal
injury. Always wear heavy-duty gloves when handling the blades.
Maintenance After Each Use
Air filter
A. Pull out the top side of lock lever (1) (step1), then pull the lock lever upwards to unlock it (step 2).
B. Pull out the cylinder shield (2) rearwards and remove it.
C. Push in the knob of lock rod (3) forward to loosen it.
D. Remove the air filter (4).
Dust on the air cleaner surface can be removed by tapping a corner of the cleaner against a hard
surface. To clean dirt in the meshes, split the cleaner into halves and brush o the dust lightly or
wash in non-inflammable solvent, or replace the air filter. To assemble the cleaner halves, press until
it clicks.
To Next Page
Loading...
